Fiber Optic Cable Floor Mounting Apparatus

For star floors to be built with a fiber optic lighting system, fiber optic cables are laid on the main concrete and then a leveling screed with a thickness of approximately 5 cm to 8 cm is poured on it. However, there are some problems during screed casting.

In the floor application, situations such as the fiber optic cable end remaining in the concrete or breaking during the screeding occur most of the time. In this case, the desired result cannot be achieved by wasting the effort, time and money spent.

In order to eliminate these negativities, we have developed the patented fiber optic cable floor mounting apparatus, which we have developed with our expertise in fiber optic lighting, especially for fiber optic cables.

Thanks to the floor mounting apparatus, after the leveling screed is placed on the fiber optic cables laid on the floor, the cables are kept straight without breaking and with the ends facing upwards as sprouts.

Features

• Material: ABS and Aluminum
• Function: Provides sprout fixation of fiber optic cables on the concrete floor surface
• Operating temperature: -20°C to +70°C
• Product dimensions: Height 15mm, Diameter 60mm
• Usable cable thicknesses:
  • 0.75mm (LC-750 series)
  • 1mm (LC2-1000 series)
  • 1.5mm (LC2-1500 series)

Application

• The points where the fiber optic cable ends are desired are marked on the floor.
• The fiber optic mounting apparatus adheres to the floor surface marked with epoxy.
• After the epoxy adhesive dries, the fiber optic cable ends are attached to these apparatus and the process is completed.